HydroSen

Detection of hydrogen
Range of measuring between 10 ppm and 1.000 ppm
Low power consumption
Typical areas of use: Leakage- and safety monitoring of fuel cells or electrolysis equipment

Sensor type:	HydroSen
Measurement principle:	Solid electrolyte gas sensor (mixed potential sensor)
Range of measuring:	0 – 1.000 or 0 – 10.000 ppm H₂ (max. 50 % UEG)
Sensor temperature:	630°C
Sensor heat output:	ca. 3,0 W
Reaction time of sensor element:	< 1 s
Sensor signal:	0 – 700 mV
Temperature - are of use:	up to a maximum of 450 °C (depends on housing)
Output electronics:	0/4 – 20 mA and LAMTEC system bus